- 49 -
Step 4 : Press the WPS buttons of WiFi AP ( Router) soon in few seconds
Step 5: After few seconds , there are short 2 beeps which means WPS connection
successfully.
There are messages updated
during the configuration in “ WPS status “ section :
As WPS c
onnection successfully , there is “Configured “ message as following :
If user does not press the WPS function of selected AP ( WiFi Router )
SCAN AP
……
PCB: NO AP
(one Long Beep) No Used
Which means the WPS connection fail and there is one long beep mean the connection fail.
Please try again. )
Step: 6
: You can see the WPS connection in section “ WiFi Info “ & “ WiFi Survey “ of Network
In “ WiFi Survey “
