Avigilon 1.0MP-HD-DOME-DN, Operating And Installation Instructions

Page: 13 / 28

13
Installation
Installation Steps
Follow these steps to install the dome camera. Details on how to complete each of these
steps are in the following sections.
Check the package contents against the list below.
Remove dome cover.
Mount the dome camera.
Connect power.
Aim the camera.
Connect the camera to Avigilon Control Center software.
Package Contents
The package contains the following:
Avigilon Panoramic High Definition IP Dome Camera
Terminal Block
T20 Pin-in-Torx Key
3 Screws and Anchors for Solid Walls
Drill Template
Required Tools and Materials
The following items are required to complete the installation. Items marked with (*) might not
be needed for your installation:
(*) Small slotted screwdriver with 5/64” or 2 mm blade width (only needed for connecting
power when not using Power over Ethernet)
Removing the Dome Cover
Remove the dome cover by loosening the 3 tamper-proof screws that fix it to the dome base.
The pin-in-torx key included with the dome camera can be used to loosen the screws. Be
careful not to scratch the dome bubble.
1.
2.
3.
4.
5.
6.
•
•
•
•
•
•