Avigilon 1.0MP-HD-DOME-DN, Operating And Installation Instructions

Page: 20 / 28

20
Connecting to Microphones
The dome camera can be connected to an external microphone through the audio connector.
The audio connector is a 3.5 mm (1/8”) input for a mono microphone, or a line-in mono signal.
The left channel of the stereo signal is used. Consult the software user guide for details on
how configure the audio input.
Installing Replacement Dome Bubble
The dome bubble can be replaced if it is damaged.
To replace the dome bubble, perform the following steps:
Remove the dome cover by loosening the 3 tamper-proof screws.
Remove the 4 screws and the retaining ring fastening the bubble to the dome cover.
Pull the bubble out of the aluminum cover and remove the o-ring.
Put the o-ring on the replacement bubble and insert it into the dome cover.
Screw the retaining ring into the dome cover.
Figure:
Dome bubble assembly
Cleaning
Body
Use a dry or lightly dampened cloth to clean the camera body.
Caution
– Do not use strong or abrasive detergents when cleaning the camera
body.
1.
2.
3.
4.
5.