background image

4)  Do not lay tools or metal parts on top of batteries. 
5)  Disconnect charging source prior to connecting or disconnecting 

batteries terminals. 

  Servicing  of  batteries  should  be  performed  or  supervised  by 

personnel  knowledgeable  of  batteries  and  the  required  precautions.   
Keep unauthorized personnel away from batteries. 

  When replacing batteries, replace with the same number and type of 

sealed lead-acid battery. The maximum ambient temperature rating is 
40

  This pluggable type A equipment with battery already installed by the 

supplier is operator installable and may be operated by laymen. 

  During the installation of this equipment it should be assured that the 

sum  of  the  leakage  currents  of  the  UPS  and  the  connected  loads 
does not exceed 3.5mA. 

  Attention, hazardous through electric shock. Also with disconnection 

of this unit from the mains, hazardous voltage still may be accessible 
through supply from  battery.  The  battery supply  should be therefore 
disconnected  in  the  plus  and  minus  pole  of  the  battery  when 
maintenance or service work inside the UPS is necessary. 

  The mains socket outlet that supplies the UPS shall be installed near 

the UPS and shall be easily accessible. 

 

INTRODUCTION 

This  UPS  is  specially  designed  for  Personal  Computer  with 
multi-functions.    Its  light  weight,  compact  design  perfect  fits  to  the 
limited  working  environment.    The  line  of  UPS  is  equipped  with  boost 
and buck AVR to stabilize input voltage range.    It is also built-in with DC 
start  function.    This  function  enables the  UPS to  be  started  up  without 
AC  power  supplied.  Although  it’s  a  small  UPS,  The  main  features  of 
Aviem Pro UPS are listed below: 

  Microprocessor control guarantees high reliability. 

  Equipped with Boost and Buck AVR. 

  Green Power Function for energy saving. 

  DC Start Function. 

  Auto restart while AC recovery. 

  Compact size, Light Weight. 

  Provides AC Overload protection. 

Summary of Contents for PRO 1000VA









Reviews: