Avidyne Entegra EX5000, Pilot'S Manual

Page: 98 / 200

Aux Pages – Configuring the EX5000
Entegra EX5000 -84- 600-00121-001 Rev 01
1) Entegra EX5000 Version Information —Displays software part
number, serial number, and media part number. Expiration dates
for on-board databases are also shown on this page.
2) Message List including sensor status —A record of the
messages displayed in the message bar. If more messages are
active than space allows, the right inner knob will allow scrolling.
3) Datalink Setup —Provides access to Datalink Messaging setup
options.
For information about Datalink, see Section 11, "Datalink
(Optional)" on page 123.
4) Lightning Strike Test —Initiates a self-test of the WX-500
lightning sensor, if installed.
5) Traffic Standby/Traffic Self-Test —If a SkyWatch traffic sensor
is installed:
n
Traffic Standby switches the sensor back into standby mode
only while on the ground. To view traffic data while on the
ground press
Traffic in Map page.
n
Traffic Self-Test replaces Traffic Standby after the Traffic
sensor has entered Standby. Initiates a 30 second self test of
the SkyWatch traffic sensor only while on the ground.
6) Nav Src —Switches between GPS1 and GPS2 to provide position
information and flight plan data to the moving map.
7) Setup Menus —Buttons to select specific setup functions
including Airport Filter, Declutter Settings, Data Blocks, and
System Time.
8) Scroll knob —Controls the cursor to allow review of all the
messages in the message list. The Scroll knob is only labelled
and active when there are more messages than fit in the
message list window.