Avidyne Entegra EX5000, Pilot'S Manual

Page: 81 / 200

CMax Selection Page
600-00121-001 Rev 01 -67- Entegra EX5000
2) AutoFill —When pressed, moves the detected destination airport
listed on the button into the Airport Entry Field.
3) Select Chart —Moves the active selection cursor from the Airport
Entry Field to the Chart Selection list.
4) Position knob —Use the left outer knob to move the cursor within
the Airport Entry Field to the next character location.
5) Select knob —Use the left inner left knob to select the character
for the current cursor position when entering an airport identifier.
The character selection goes from A to Z, then 0 to 9, then
restarts at A.
6.7.2 Chart NOTAMs Page
Displays the chart NOTAMs associated with the currently displayed
airport.
Note : The AutoFill button automatically detects the destination airport if the
final waypoint is an airport or a waypoint that is part of an instrument
approach procedure. However, for some approaches,
AutoFill
may detect
another nearby airport rather than the intended destination. Make sure the
desired airport is displayed before pressing the button.
AutoFill
does not
display under the following conditions:
• An Airport cannot be determined due to GPS limitations.
• When the feature is not supported by some GPS models.
• The current airport destination is not available in your chart data
coverage area.