Appendix B - Procedure to remove electronics cover and electronic canister
1. Remove the two screws that secure canister cover, unlock the latch by pulling it up and remove
the canister cover. (See Figures below).
2. Disconnect all connectors from electronics canister, make sure to note connector locations.
Remove the screw that secures canister housing and ground cable. Remove the screw that
secures ground cable. (See Figures below).
3. Remove the canister with electronics from SmartCal enclosure.
Canister cover
Indicated screw
secures cover
and housing of
canister
Indicated screw
secures cover and
housing of canister
Latch
Indicated screw
secures housing
of canister and
ground cable
Canister housing
with electronics
Indicated screw
secures ground
cable
Indicated screw
secures housing
of canister and
ground cable
page 29
AVID SmartCal valve positioner
Installation & operating instructions