Media Application Controller Operation Guide
Studio Monitor Express (Mac)
93
10.5 Config
Figure 10-5
Config Tab
The Config tab displays the currently selected Core Audio device driver,
Dim
and
Fixed
output levels, and a CPU meter.
Audio Device
: This pull-down menu selects the Core Audio driver for the sound card to
use with SME.
Set Dim Level
: Sets the attenuation amount (in dB) for the program signal when press-
ing the MC monitors section
Dim
button.
Set Fixed Level
: Sets the fixed output level for the Control Room output. This is useful
for setups sending the output of the DAW to a separate mixer or router that has its own
level controls, instead of controlling the output level from SME.
CPU Usage
: Shows SME’s CPU usage.
NOTE: When the output driver is changed, patching is reset to default settings with
no external or output patches enabled. Patches must be reassigned in the
Patching tab.
10.6 Talkback Setup
1.
Connect the MC’s Talkback Mic to your audio interface.
2.
Enable 48V phantom power for the Talkback Mic (required).
3.
In the SME Sources Tab, create and name a Source
Talkback
(required).
4.
In the Main Tab, enable
Talkback
for each section requiring Talkback routing
(Main, Mon A, Mon B).
5.
In SME Main Tab, press the
Talkback
button to enable Talkback.
6.
Press the MC’s
Talkback
button to engage Talkback (follows latching/momentary
logic defined in
Soft Keys Setup
on page 42).
7.
Connect a standard footswitch to the MC’s rear panel
Footswitch
jack to toggle
Talkback on/off remotely.
Summary of Contents for MC Pro
Page 1: ...MC Pro Operation Guide Version 2 5 6 ...
Page 27: ...Media Application Controller Operation Guide Installation and Configuration 18 ...
Page 33: ...Media Application Controller Operation Guide Main Touchscreen 24 ...
Page 84: ...Media Application Controller Operation Guide Studio Monitor Express Windows 87 ...
