manualshive.com logo in svg

Avid Technology MC Pro, Operation Manual, Page: 16 / 156

Share
Download
Avid Technology MC Pro Operation Manual Download Page 16

Media Application Controller Operation Guide 

Installation and Configuration

7

2.2  EuCon Software Installation

The EuCon Software installs components that enable bi-directional communication be-

tween the MC and the workstation. The 

EuConWS

 version of the software must be in-

stalled on every workstation used with the MC. The 

EuConMC

 version is installed on 

the MC when shipped and can be easily upgraded.

2.2.1  Uninstalling Previous Versions

The old version of the EuCon software must be uninstalled on the workstation before 

upgrading to the new version. Close all applications and follow the procedure for Win-

dows or OS X:

Windows:

 Choose 

Start > All Programs > EuCon

, and click 

Uninstall

. The EuCon 

Uninstaller removes the EuCon software from the workstation.

OS X

: Open a Finder window, navigate to the Applications folder, and run the 

EuCon-

WS Uninstall

 program to remove the EuCon software from the workstation.

Proceed with installing the new EuCon software. Rebooting the computer before install-

ing the new software is not necessary.

2.2.2  EuCon WS Software Options (Windows)

The Windows installer offers the following options:

•  EuCon Workstation Core

: This is the main driver that controls communication 

between the MC and workstation. This option cannot be deselected (it is 

grayed 

out

 and inactive), because it must be installed for the workstation to communicate 

with the MC.

•  Euphonix Studio Monitor Express (SME)

: This software monitoring application 

interfaces with the MC’s Monitor section. SME can be configured to receive audio 

from applications running on the PC or from external sources via physical inputs 

to your sound card, enabling extensive audio routing, source selection, and level 

control from the MC. Those who prefer to use Nuendo’s Control Room Monitor 

(similar to SME), may choose not to install SME.

•  EuCon adapter for Nuendo

: This enables EuCon communication between the 

MC and Nuendo. Nuendo users must install this component. A license to enable 

EuCon within Nuendo (in Nuendo’s Device Setup) is required and must be autho-

rized on your Syncrosoft USB dongle before you can use Nuendo EuCon with the 

MC.

Summary of Contents for MC Pro





























































































































































Reviews:

No comments