![background image](http://html1.mh-extra.com/html/avid-technology/mc-pro/mc-pro_operation-manual_3031286080.webp)
Media Application Controller Operation Guide
Studio Monitor Express (Windows)
83
9.5 Hardware I/P Patch
Figure 9-5
Hardware I/P Patch Tab
The Hardware I/P Patch tab routes audio from the hardware inputs (
Hardware I/P
) on
your workstation’s sound card to the
Application I/P
and/or inputs of SME’s mixer
inputs (
SME I/P
).
To pass audio from a physical input to an application, the hardware inputs (
Hardware
I/P
) must be patched to
Application I/P
inputs. We recommend a one-to-one patch to
make it easier to track the mapping between physical inputs and channel inputs in your
DAW. However, it is possible to re-route a hardware input to a different EuIn input. For
example, if the kick drum is on the 24th physical input and you wish it to appear to your
DAW that it’s on the 1st input: select 1 from the
Hardware I/P 24’s Application I/P
drop-down menu.
Refer to the CD Player example on page 75: If your CD player is routed to hardware
inputs 40 and 41, select
1
and
2
from the
Hardware I/P 40 and 41’s SME I/P
dropdown
menus respectively. This routes the CD player to Mixer inputs 1 and 2, which were set
to a stereo monitoring section on page 75.
NOTE: Only outputs enabled in the Config tab (page 80) are available from the
Application I/P and SME I/P drop-down menus. SME minimizes its CPU
resources if you enable only the inputs you plan to use.
Summary of Contents for MC Pro
Page 1: ...MC Pro Operation Guide Version 2 5 6 ...
Page 27: ...Media Application Controller Operation Guide Installation and Configuration 18 ...
Page 33: ...Media Application Controller Operation Guide Main Touchscreen 24 ...
Page 84: ...Media Application Controller Operation Guide Studio Monitor Express Windows 87 ...