manualshive.com logo in svg

Avid Technology MC Pro, Operation Manual, Page: 12 / 156

Share
Download
Avid Technology MC Pro Operation Manual Download Page 12

Media Application Controller Operation Guide 

Introduction

3

1.1.4  Level 4: Mackie Control Universal

The MC supports the Mackie Control Universal protocol to control both DAWs and 

other software that supports this protocol.  Mackie Control mappings are saved with Ap-

plication Sets for instant recall when each application becomes active.

1.1.5  Level 5: EuCon High-Speed Control Protocol

EuCon is a control protocol originally developed to communicate between the  

System  5  control  surface  and  its  software  applications. Applications  specifically  de-

signed to work with the MC and the EuCon Application Programmer Interface are called  

EuCon-aware

 applications, while all others are called 

generic

. EuCon-aware applica-

tions allow a higher level of integration than generic applications.

The EuCon protocol enables high-speed, bidirectional communication between Eupho-

nix consoles, the MC, and EuCon-aware software applications. The MC and a EuCon-

aware application are tightly interwoven so the host application does not see the MC as 

a controller, but as an integrated part of its user interface. Every MC control can intel-

ligently and rapidly access any function in a EuCon-aware application.

Avid Pro Tools

Avid Pro Tools 9 supports the EuCon protocol for fully integrated control of Pro Tools 

software.

Steinberg’s Nuendo

Nuendo includes EuCon support via an optional Nuendo EuCon module, enabling con-

trol from Euphonix control surfaces (i.e., MC, System 5-MC, and System 5 film post-

production and music consoles). The Nuendo EuCon module is sold exclusively through 

the Avid distribution network and packaged with MC and System 5-MC.

Apple’s Logic Pro

Logic Pro supports the EuCon protocol (as of v.7.2.1), enabling full control of all 

Logic Pro tracks, plugins, and other parameters through the MC and System 5-MC.  

EuCon support is built into the application and does not require any special configura-

tion or additional software from Apple.

Merging Technologies’ Pyramix with OASIS and EuCon Support

Pyramix users must purchase Merging’s OASIS control protocol package option, which 

automatically enables EuCon control. Oasis is available through Merging’s distribution 

chain for use with the MC, System 5-MC, and System 5 Hybrid consoles.

Summary of Contents for MC Pro





























































































































































Reviews:

No comments