Avid Technology FastServe Ingest Setup Manual Download Page 81

Page: 81 / 103

Release the RAID controller by sliding it out of the chassis.

Replacing System Drives in the Chassis

Before you begin, make sure you have replacement system drives available for your FastServe | Live
Edit or FastServe | Ingest server.

The system should be taken offline and powered down before replacing boards.

To replace failed system drive:

1. Observe the safety precautions described in

“Electrostatic Discharge Precautions” on page 28

and “Safety and Regulatory Information”.

2. Power down the server and unplug all peripheral devices and the AC power cables.

3. Remove the server cover as described in the

Removing and Replacing the Server Main Cover

topic.

4. Disconnect any cables that might be in danger when you are replacing the drive.

5. Identify the system drive in your chassis:

Summary of Contents for FastServe Ingest








































































































Search results

Summary of Contents for FastServe Ingest

Reviews:

Related manuals for FastServe Ingest

Brands by name

Popular brands

Avid Technology FastServe Ingest, Setup Manual

Search results

Summary of Contents for FastServe Ingest

Reviews:

Related manuals for FastServe Ingest

Brands by name

Popular brands