Avid Technology FastServe Ingest Setup Manual Download Page 37

Page: 37 / 103

Press Enter.

10. Set

IPv4 Subnet Mask

according to your network settings (e.g.: 255.255.224.0).

Press Enter.

11. Set

IPv4 Gateway Address

according to your network configuration (Ex: 10.10.0.254).

Press Enter.

12. Save and Exit by pressing

F10

13. Restart your FastServe | Live Edit or FastServe | Ingest server.

To connect to your FastServe | Live Edit or FastServe | Ingest server through IPMI:

1. Make sure your FastServe | Live Edit or FastServe | Ingest server is connected to the network

through the 1 GB socket. The server does not need to be powered on.

2. Open a web browser and enter your IPv4 address in the address bar.

A login window opens.

3. Enter your credentials and click

Login.

Default username is

admin

, and the default password is

admin.

For BIOS 86 users, default

credentials are:

admin

Avid123

Summary of Contents for FastServe Ingest








































































































Search results

Summary of Contents for FastServe Ingest

Reviews:

Related manuals for FastServe Ingest

Brands by name

Popular brands

Avid Technology FastServe Ingest, Setup Manual

Search results

Summary of Contents for FastServe Ingest

Reviews:

Related manuals for FastServe Ingest

Brands by name

Popular brands