Avid Technology FastServe Ingest, Setup Manual

Page: 32 / 103

32
FastServe | Live Edit / FastServe | Ingest Server Connection Information
The rear panel of the FastServe | Live Edit / FastServe | Ingest server provides access to the power
supplies, video port, 1 and 10 gigabit (Gb) Ethernet ports, VGA port, serial port, two USB connectors
for the keyboard, mouse, Reference IN and OUT sockets, LTC Input and Video Inputs/Outputs.
FastServe | Live Edit / FastServe | Ingest Server - Rear Panel
Connecting the Power Cords
Your FastServe | Live Edit / FastServe | Ingest server has two power supplies. If your local power
distribution is not compatible with the supplied cords, you must provide your own IEC power cables
that are compatible with your country's power system.
To connect/reconnect power:
1. Attach the power cords to both power receptacles on the rear of the server.
2. Connect the other end of both power cords to a properly grounded stable power source.
c
For maximum power protection, Avid recommends a surge protected un-interruptible power
supply (UPS).
c
To avoid the risk of electrical shock and fire, inspect the system power cord and plug routinely.
Ensure they are not damaged in any way.
When all necessary connections have been completed and configured, switch on the Server by
pressing the POWER button on the front panel.
w
This unit has two connections to the main supply. For protection against electric shock,
disconnect both electric cords before service.
c
Do not remove the power module without gloves. The cover of the power module serves as a
heat-sink for cooling. Temperature can reach 60°C under full load condition. If removed, put
aside the power module until cool, and prevent anyone from touching it until it is cooled.
c
Risk of explosion if lithium battery on motherboard is replaced by an incorrect type. Dispose of
used batteries according to the instructions.