E6L Engine AVB-192 Network Card Replacement
12
Connect the WSG-HD card to the Master AVB-192 as described, regardless of whether or not there is a second AVB-192 card
installed.
• In E6L-112 Engines with 2x AVB-192 cards, cabling should look similar to the following image:
12
Re-install the E6L Engine Core
Re-install the E6L Engine Core
1
Slide the core back into the E6L chassis, making sure the connectors face outward.
When the core is fully seated into the chassis, the two latches at the bottom of the chassis should be fully collapsed.
2
Tighten the four thumbscrews to secure the core to the chassis.
3
Figure 29. Ethernet connections from WSG-HD to Master AVB-192, and from Master AVB-192 to 2nd AVB-192 (E6L-112 only)
Cable colors shown might not match the cables in your E6L.
Figure 30. Four thumbscrews on the back of the E6L
