E6L Engine AVB-192 Network Card Replacement
13
Confirming Installation
After installing the Network card, confirm that the installation was successful.
To confirm installation:
1
Connect power to the E6L engine.
2
Connect an audio network cable from Network port
A
on the S6L control surface to Network port
B
on the top-most Network
card.
3
Power on your control surface and engine, and if necessary pair the engine to the control surface in the
Options > Devices
page.
4
Go to the
Options > Devices
page.
• Your AVB-192 card(s) should appear in the appropriate slot in the
NETWORK CARDS
column.
• The WSG-HD or MADI-192 card (if any) should appear in the appropriate slot in the
EXPANSION CARDS
column.
5
A firmware update of your newly installed Network card starts automatically after installation. Progress of the update is indi-
cated on-screen.
6
When the firmware update is complete, go to the
Options > System
page, select
Shutdown
, and then power off both the control
surface and the engine.
7
Power your control surface and engine back on. Your newly installed Network card is now ready for use.
See the
VENUE S6L System Guide.pdf
and the
VENUE S6L Installation Guide.pdf
for information on system configurations sup-
ported by your Network cards.
In E6L-112 engines, a second MADI-192 installed in AVB Network slot 3 is listed in slot 2 under
EXPANSION CARDS
.
