E6L Engine AVB-192 Network Card Replacement
8
To re-install a second AVB-192 Network card (if any):
1
If necessary, re-install or move back into position the captive rear bracket for slot 2.
2
Inside the unit, place the face of the card into position in the slot, with the back of the card tilting upwards.
3
Using two hands, hold the front of the card in place in the slot with one hand, and slowly move the back of the card downwards
along the sheet metal until the card is horizontal.
4
Once the card is horizontal, make sure the tab on the faceplate of the Network card is positioned on the outside of the slot.
5
Align the PCIe connector on the card with the corresponding PCIe port, and align the flange on the card with the retaining clip
on the PC board.
Figure 18. Placing the card into position inside the engine
Figure 19. Proper position of the Network card faceplate tab
Figure 20. Aligning the and the PCIe connector to the port (right) and the card flange to the retaining clip (left)
