E6L Engine AVB-192 Network Card Replacement
5
7
Release the AVB-192 card from its PCIe slots by doing the following (when two AVB-192 cards are present, start with the upper
card):
• With one hand, lift the tab on the retaining clip to release the card from its clip.
• With your other hand, pull the card out of its PCIe port.
8
Slowly lift the back of the card upwards along the bracket (you might need to use your other hand to pull the bracket back slightly
so the card can clear its guide slots).
9
Carefully remove the card from the core and set it aside.
10
On systems with two AVB-192 Network Cards, repeat the previous steps for the lower AVB card.
Figure 11. Lifting the tab using a thumb and disconnecting the AVB-192 card from its PCIe slot
Figure 12. Removing an AVB-192 card
