Avid Technology 9320-65044-00, User Manual

Page: 140 / 186

D-Control Guide 134
Flip Mode and Flop Mode
Flip Mode
Channels in Normal mode can use Flip Mode, which transfers
controls from a row of encoders to the channel faders.
In Flip mode, the rotary encoder control swaps with the chan-
nel fader; the encoder Select switch swaps with the channel Se-
lect switch; the encoder Bypass/Mute/Pre switch swaps with
the channel Mute switch; and the encoder display swaps with
the channel display.
In Flip mode, the Flip switch for the affected row of encoders
lights, and the affected encoder displays appear in yellow.
To transfer controls from a row of rotary encoders to the channel
faders:

Press the Flip switch that corresponds to the encoder row
that you want to transfer.
To exit Flip mode:

Press a lighted Flip switch.
Flop Mode
Channels in Normal mode can use Flop mode, which transfers
controls between any two rows of rotary encoders, allowing
you to bring any encoder control within easy reach from the
mix position.
To transfer controls between any two rows of rotary encoders:

Hold Start (Windows) or Control (Macintosh) and repeat-
edly press the Flip switch on row of encoders where you want
to transfer the controls. The Flip switches on each row light to
indicate which controls are being transferred.
The transferred (or “flopped”) controls are indicated by yel-
low text in their encoder displays.
To return flopped controls to their original positions:

Press either of the lit Flip switches.
Assigning Inserts and Sends While in Flip
Mode
You can assign Inserts or Sends directly to an encoder even
when its controls are flipped to the channel fader.
When an encoder’s controls are flipped to the channel fader,
the channel Select switch replaces the encoder Select switch,
the channel Mute switch replaces the Bypass/Mute/Pre switch,
and the channel Fader replaces the encoder knob.
To assign an individual insert or send to a flipped encoder:
1
On the channel where you want to make the assignment,
press the Inserts or Sends switch to display the corresponding
elements on the channel. The controls for the flipped encoder
appear on the channel fader.
2
Press and hold the channel Select switch on the channel
where you want to assign the insert or send. The channel scrib-
ble strip shows a right arrow (“>– –”) to indicate the channel
is in assign mode.
3
Move the channel fader to select from the first level of menu
choices.
4
Press the channel Select switch to move down and the chan-
nel Mute switch to move up through menu levels.
5
Do one of the following:
• Press the flashing channel Select switch to confirm the
assignment.
– or –
• Press the flashing Escape switch to cancel the assign-
ment.