Avid Technology 9320-65044-00, User Manual

Page: 134 / 186

D-Control Guide 128
Assigning Inputs in Sessions with
Multiple Plug-In Outputs
In sessions with plug-ins that have multiple outputs, the aux-
iliary outputs of those plug-ins are available as inputs in other
audio and Auxiliary Input tracks. These appear as a third cat-
egory of inputs, labelled
plug-ins , in the track input menu.
When assigning inputs from D-Control, this third category of
inputs appears as a top-level menu choice.
To assign an input from a plug-in output:
1
Press the Assign Inputs switch.
2
On the channel where you want to make the assignment, turn
an encoder knob to select Plug-In from the first level of menu
choices.
3
Press the encoder Select switch to move down to the individ-
ual plug-in level.
4
Turn the encoder knob to select the plug-in whose auxiliary
output you want to select.
5
Press the encoder Select switch to move down to the list of
plug-in auxiliary outputs.
6
Do one of the following:
• Press the flashing encoder Select switch or press the
flashing Assign Inputs switch to confirm the assignment.
– or –
• Press the flashing Escape switch to cancel the assign-
ment.
Assigning Inserts and Sends Directly
from a Channel
You can assign Inserts or Sends directly to individual channels
without entering global Assign mode.
To assign an individual insert or send:
1
On the channel where you want to make the assignment,
press the Inserts or Sends switch to display the corresponding
elements on the channel’s encoders.
2
Press the Select switch on the encoder where you want to
make the assignment. The encoder scribble strip shows a right
arrow (“> – –”) to indicate the encoder is in Assign mode.
3
Turn the corresponding encoder knob to select from the first
level of menu choices.
4
Press the encoder Select switch to move down and the By-
pass/Mute/Pre switch to move up through menu levels.
5
Do one of the following:
• Press the flashing encoder Select switch to confirm the
assignment.
– or –
• Press the flashing Escape switch to cancel the assign-
ment.
To change a previously assigned insert or send:
1
On the channel where you want to change the assignment,
press the Inserts or Sends switch to display the corresponding
elements on the channel’s encoders.
2
Press and hold the encoder Select switch for the insert or
send you want to change, until the encoder scribble strip
shows a right arrow (“>”) next to the assignment to indicate
the encoder is in Assign mode.
3
Do one of the following to select a new insert or send:
• Turn the corresponding encoder knob to select from the
current level of menu choices.
– or –
• Press the encoder Select switch to move down and the By-
pass/Mute/Pre switch to move up through menu levels.
4
When the new insert or send is displayed in the encoder
scribble strip, do one of the following:
• Press the flashing encoder Select switch to confirm the
assignment.
– or –
• Press the flashing Escape switch to cancel the assign-
ment.
To remove an individual insert or send:
1
On the channel where you want to remove the assignment,
press the Inserts or Sends switch to display the corresponding
elements on the channel’s encoders.
2
Press and hold the encoder Select switch for the insert or
send you want to remove, until the encoder scribble strip
shows a right arrow (“>”) next to the assignment to indicate
the encoder is in assign mode.
3
Press the encoder Bypass/Mute/Pre switch repeatedly until
you reach the top-level menu for the assignment.
4
Turn the encoder knob counter-clockwise until no assign-
ment is visible.
5
Do one of the following:
• Press the flashing encoder Select switch to confirm the
removal.
– or –
• Press the flashing Escape switch to cancel the removal
and restore the assignment.