O P E R A T I N G I N S T R U C T I O N S
56
Checking the brake lining
Wheels brake system
n
Disc brakes are mounted on both
axles.
n
Brake pads have been worn if the
indicator light on the instrument board
and diode on the check module under
the glove box of the instrument board
come on.
Warning!
Only the authorized service
station may perform the repla-
cement of brake pads.
FN0670
n
Brake pads need to be replaced
when there is no gap in their centres
(see the figure).
n
The minimum thickness of the brake
pad friction material is 2 mm.
n
The minimum total thickness of the
brake pad is 9 mm.
n
Replace the pads with ones of the
approved type only.
2 m m
Brake system inspections
n
To assure a correct function of the
brake system, it is necessary to check
it for a good condition at regular terms.
n
Daily
:
-drain the air reservoirs
n
Once a month
:
-clean the air reservoirs from outside
and check whether they have not
corroded and if attached pro-
perly.Replace the damaged air
reservoir immediately.
-check the compressor intake
manifold and check whether the air
filter has not been polluted.
-check the screwed connections and
manifolds of the whole brake system
for leaks.
-check the pipes and hoses for
a good condition. If damaged, carry out
a replacement.
Summary of Contents for D 100
Page 66: ...OPE RAT IN G INST RU CTIONS 66 ...
Page 83: ...83 TRO UBLES HOOT ING ...