Avia D 100, User Manual

Page: 34 / 108

D E S C R I P T I O N
34
FN0390
Hydraulic cabin tilting
Cabin lowering
n Move the distributor lever (item 3)
into vertical position downwards.
n Pump until locks of the rear location
are closed (cabin rests down in place
and is locked).
n Move the distributor lever (item 3)
into horizontal position.
Cabin tilting
n Move the distributor lever (item 3)
into vertical position upwards (see
schema on the pump).
n Insert rod (item1) into lever of the
hydraulic pump (item 2) and pump.
Hydraulic locks of the rear location will
open and cabin starts to tilt itself.
n The cabin must be tilted fully to its
tilted position - a partial tilting is not
allowable for entering beneath the
cabin.
n Let the distributor lever be in vertical
position with the cabin lifted.
3
1
3
FN0395
2
Instructions for cabin
tilting
Warning!
n Prior to tilt the cabin, shut the
engine off and shift into neutral.
n Set the vehicle parking brake.
n Secure the objects which are
placed inside the cabin and shut
the doors properly .
n Prior to start tilting, we recom-
mend to open the bonnet.
n Take an extreme care when til-
ting.
n Be very careful when working
beneath the tilted cabin.
n
It is not allowed to stay ahead of
the cabin tilted.
n It is not allowed to stay beneath
the cabin if tilted partially.
n The necessary workshop he-
ight to tilt the cab is 3,000 mm and
3,800 mm with the additional su-
perstructure.
n If the vehicle is equipped with
the safete bar of the tilted cab, it
has to be always used!