![background image](http://html.mh-extra.com/html/avery-dennison/zm-110/zm-110_user-manual_3030533011.webp)
AWT35-501813
Issue AA
Page 11
2.5.2. Operation Keys
Keys are shown below along with their functions. Some keys have secondary functions.
Press and hold the
OFF
key to turn off the scale.
“oFF” will be displayed for 2 seconds.
Press the
ON
key to turn on the scale.
The scale will run through a display test before displaying 0.000.
-
Press the
UNITS
key to scroll through the active units of measure.
-
In Menu mode
: It aborts a numeric entry and acts as an ESCAPE key (
ESC
).
-
Press the
ZERO
key to zero the scale. Enabled only within the ±2% range of
capacity.
-
In Menu mode
: It acts as a left arrow key
(◄).
-
Press the
TARE
key to perform a tare function.
-
In Menu mode
: It acts as a right arrow key
(►).
-
Press the
SELECT
key to toggle between the operating modes enabled.
-
In Menu mode
: It increments a numeric value
(▲).
-
Press the
key to send information to a peripheral device.
-
In Menu mode
: It acts as an ENTER key to accept a displayed value or function
(
↵
).
2.6. Error Codes
Err H
Initial zero too high (over FULL SCALE + 10%), for approved models [LF 6]
Err L
Initial zero too low (under FULL SCALE
– 10%), for approved models [LF 6]
Err N
Unstable internal count, this may indicate the load cell or electronics are faulty
-OL-
Overload, full ca9d