21
3
P
RIOR
TO
OPERATING
3.1 I
NSERT
THE
LABELLING
MATERIAL
ALS
380
3.1.1
Prerequisites
– The label dispenser is switched off at the main
[11A] switch.
➔
Verify flawless functioning of the safety equipment.
➔
Check machine for visible damage. Any discovered
deficiency is to be reported immediately.
➔
Non-required materials and objects are to be re-
moved from the working area of the machine.
➔
Make sure that only persons authorised to work on
the machine are within the working area of the ma-
chine.
➔
Use required personal safety gear in accordance
with the regulations, e.g. wear hair nets, and protec-
tive eye-glasses.
3.1.2
Insert the label roller
WARNING!
Risk of injury due to moving or rapidly rotat-
ing parts!
➔
Before inserting the label roller, ensure
that the machine is switched off at the
main switch.
➔
Never switch on the machine before the
label ribbon has been completely thread-
ed into position.
Remove the old backing material
If backing material remains on the rewinding [12A]
roller:
➔
Swing the lever [12C] at the rewinding roller over the
red [12B] point.
– The tension of the rewinding roller spreader mecha-
nism is relieved.
➔
Remove the rewound backing material.
Remove adhesive residues
➔
If necessary, clean the following components:
– Dispensing edge
– Deflection rollers and drive roller unit in the dispens-
er head
– Dancer arm rollers and deflection rollers
– Rewinding roller
[11] Main switch on the housing
[12] Remove the backing material from the rewinding roller
A
Old backing material
B
Red point on the rewinding roller
C
Lever for the spreader mechanism of the rewinding roller
A
C
A
B
3
P
RIOR
TO
OPERATING
3.1
INSERT THE LABELLING MATERIAL
Summary of Contents for ALS 380
Page 1: ...ALS 380 OPERATING MANUAL Label Dispenser Article number A6392 Release 06 2005...
Page 2: ......
Page 89: ......