Users Manual Model 686 / 686 HT
Control Panel Operation
•
••
•
41
I M A G E R V E R S I O N
U S A 1 9 . 0 1
This screen follows the "CONTROLLER VERSION" screen. This screen shows
operating system version for the imager (AT).
Pressing the MODE / Down Arrow key will take the user back to the "LABEL
COUNTER" screen.
Pressing the EXIT / Up Arrow key will take the user back to the HOME screen.
FEATURE SETUP SCREEN
P R E S S E N T E R F O R
F E A T U R E S E T U P
This screen follows the "LIFE COUNT / VERSIONS".
Pressing ENTER will take the user to the "FEATURE SETUP" screens. Pressing the
MODE / Down Arrow key will take the user to the "VERIFIER SETUP" screen.
Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
C U T T E R I S E N A B L E D
P R E S S E N T E R T O D I S A B L E
OR
C U T T E R I S D I S A B L E D
P R E S S E N T E R T O E N A B L E
This screen is the first screen of the "FEATURE SETUP". This screen allows the
cutter to be enabled or disabled. Pressing ENTER will toggle from ENABLED to
DISABLED and vice versa. Pressing the MODE
/
Down Arrow key will take the
user to the "EMULATION MODE" screen. Pressing the EXIT
/
Up Arrow key will
take the user back to the "HOME" screen.
E M U L A T I O N M O D E : N O N E
N E W E M U L A T I O N M O D E : 6 3 0
This screen follows the "CUTTER ENABLE
/
DISABLE" screen. This screen
allows the EMULATION MODE to be changed. Use the <YES and NO> keys to
move between NONE, 630, and 650 modes. Pressing ENTER will update the
emulation mode with the selection after new emulation mode. Pressing the MODE
/
Down Arrow key will take the user to the "DEFAULT TRANSFER TYPE" screen.
Pressing the EXIT
/
Up Arrow key will take the user back to the "HOME" screen.
D E F A U L T T R A N S F E R T Y P E
V A L U E : X X X N E W V A L U E : Y Y Y
This screen follows the "EMULATION MODE" screen IF emulation mode is
something other than none. This screen allows the DEFAULT TRANSFER TYPE
to be changed. This transfer type is used when the printer is in 630 or 650 emulation
mode. The 630 and 650 do not send valid
6X6
transfer types in their PCL code.
This default is used for those formats. Use the <YES and NO> keys to change the
number value at the cursor position. Pressing ENTER will update the current value
with the new value (i.e. 053 for type 53). After ENTER is pressed on the last digit
the TRANSFER TYPE on the top line will be updated. Pressing the MODE
/
Down
Summary of Contents for 686 HT
