12
•
••
•
Printer Setup
Users Manual Model 686 / 686 HT
Configuration Number Two:
Line voltage within the range of
(See 230VAC Fuse Placement)
180 - 265VAC @ 50 - 60Hz
1) Install two 990757 6.0A 250V Fast Acting 5 x 20MM
NOTE
: The fuse jumper must be removed to install both 5 x 20mm fuses.
115VAC Fuse Placement 230VAC Fuse Placement
A
B
C
The fuses must be between points A and B as shown not B and C.
5 X 20MM Fuse Placement
5) Reinsert the fuse drawer into the AC entry with the desired voltage up.
6) Close the AC entry and verify the correct voltage is now visible.
P.C. Board Identification
Mother Bd. (371170)
- Horizontal on bottom
of printer
Front Panel Bd. (511108)
- User interface system
686 Thermal Control Bd. (371105NE)
- AT Slot 2
686 HT Thermal Control Bd. (371105HT) - AT Slot 2
Head Driver Bd. (341106NE)
- AT Slot 1
686 Ink Drive Bd. (551105)
- Back of upright frame
686 HT Ink Drive Bd. (551105HT)
- Back of upright frame
Summary of Contents for 686 HT
