Users Manual Model 686 / 686 HT
Printer Operation & Quick Set-Up
•
••
•
27
Print Head Operation
The print head module is to be opened and closed for threading the stock and ink.
The head must also be opened to clean the head and for print head replacement.
Later in the manual, under Print Head Cleaning, and Print Head Replacement,
cleaning and replacement will be covered.
The print head has an interlock switch that prevents the printer from running with the
head in the open position. If the head is open the display will read - HEAD OPEN.
WARNING:
DO NOT TOUCH THE PRINT HEAD WITHOUT WEARING THE
ANTI-STATIC GLOVES AND THE STATIC WRIST STRAP.
To open the print head for threading supplies, turn knob “A” clockwise and pull out.
(See figure 7).
A
Figure 7 - Print Head Operation
To close the head mount plate, pull the knob out and lower the head assembly. Turn
knob “A” counterclockwise to its original position as shown above.
Summary of Contents for 686 HT
