35146AR
12
INSTALLATION AND SETUP
Note
ProConnect software setup can be performed through the ProConnect recorder local interface or
through the web browser Web Interface.
Default Administrator Username / Password
Username
: admin
Password
: 1234
Note
Once registered to AvertX Connect, your AvertX Connect credentials can be used to log in, in addition
to the default credentials listed above.
First Time Wizard
The First Time Wizard can be accessed from both the web interface and locally and will guide you through a
basic setup of your ProConnect recorder. If you wish to make system changes after the initial setup process
using the First Time Wizard, these options can be found in System Settings, User Management, and Network
Configuration.
The Setup Wizard will run the first time the recorder is powered on.
Default Camera Password
AvertX has improved our default camera password functionality with several new ease-of-use features in
software version 2.4. The updates provide admin level users the ability to define a default camera password, as
well as the ability to see previously applied camera passwords.
Change the Default Camera Password
1. Click Setup
> System Settings > General Settings.
2. Scroll down to Default Camera Password.
3. Change the default password.
Note
Passwords must be 9-14 characters and include at least two of the following: one number, one letter or
one special character (!#@$%&*).
4.
Click
Save
.
Note
This feature is only supported for AvertX cameras.
Note
This will be used for cameras which require a password on first use. It will not change the password
for any camera with the password already set.
View Camera Password History
1. Click Setup
> System Settings > General Settings.
2. Scroll down to Default Camera Password.
3. Click Show old passwords.
Note
A password will only appear in the list of previous passwords after it has been applied to at least one
camera.
