39
11. To view the all I/O devices information, click
I/O Map
.
3.8 Relay
Setting
The I/O device must be installed to use this function.
To set the Relay Setting:
1. Click the drop-down list and select the relay ID number.
2. Mark
Enable
to enable the selected relay.
3. Click
External IO
to configure external I/O device if it is available (see also
When external I/O is set and it will be available in drag down list for selecting.
4. The system automatically detects the card and input number. In the Content section,
enter relay description.
5. In the test section, click
Test
to trigger relay. Red is high and Green is low.
6. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the setting.
3.9 Alarm
Setting
n the Alarm Setting dialog box, click
Add
to insert and set new alarm setting, click
Delete
to
remove the selected alarm setting, click
OK
to exit and save the setting,
Cancel
to exit
without saving, and
Default
to revert back to original factory setting
