Avermedia NV 5000 Page 32 User Manual Download

Page: 32 / 125

IN 1

IN 2

IN 3

IN 4

TV OUT

NV5000 card

2.2.4 Installing NV5000 and I/O Audio cards

Remove the PC case cover.

Remove 2 brackets that cover the PCI slots. Save the screws.

Connect the NV5000 card and I/O Audio card with the connection cables.

Press the cards into the PCI slots firmly.

Secure the cards with the screws.

NV5000 card

I/O Audio card

IN 1

IN 2

IN 3

IN 4

TV OUT

NV5000 card

I/O Audio card

AUDIO IN 1

AUDIO IN 2

AUDIO IN 3

AUDIO IN 4

2.2.5 Installing NV6000 and I/O card

The NV6000 DOM can support up to 16 cameras and 8 audio inputs
1.

Remove the PC case cover.

Remove 2 brackets that cover the PCI slots. Save the screws.

Connect the NV6000 card and I/O card with the connection cable.

Press the cards into the PCI slot firmly.

Secure the card with the screws.

Connect the supplied AV connection cable to the D-type AV IN port.

NV6000 card

I/O card

TV OUT

NV6000

I/O card

AV connection cable

Summary of Contents for NV 5000






























































































































Search results

Summary of Contents for NV 5000

Reviews:

Related manuals for NV 5000

Brands by name

Popular brands

Avermedia NV 5000, User Manual

Search results

Summary of Contents for NV 5000

Reviews:

Related manuals for NV 5000

Brands by name

Popular brands