61
5.
Audio Record:
DVR supports one audio record for one camera. Select ON
or OFF from the drop-down list.
6.
Audio Mute:
Select ON or OFF from the drop-down list. When the DVR is
connected to the PC speaker, it will transmit the audio of a microphone.
When DVR is in preview or record mode, you can either turn on the AUDIO
MUTE if you don’t want to listen to the audio. Otherwise, you may listen to
the audio if you turn off the AUDIO MUTE.
7.
Input Channel:
Click the buttons to turn on/off the Input Channels. When
the buttons show “ON”, you can see the video images from the cameras
that are connected to DVR. When the buttons switch to “OFF”, the screens
of each camera will be black and show “Disable Camera”.
8.
Record Channel:
Click the buttons to turn on/off Record Channels. When
the buttons shows “ON”, it means the DVR is recording the assigned
channels.
9.
DVR Time:
Select a correct time to change the server’s time when you
modify DVR time Please pay attention to the time settings since this will
influence the future recording records.
10.
Record Mode and Hard Disk Information:
The dialog will show read-only
information of record mode and hard disk information.
11.
Record Schedule:
Click the desired time buttons to set a recording mode.
The system provides 4 recording modes
( T )
For automatic non-stop video recording
( S )
For sensor recording. The DVR unit initiates recording only when
the attached sensor devices detect motion from the video cameras.
( M )
For motion recording. The DVR unit initiates recording only when
motion is detected from video cameras.
( - )
Disables recording at that time schedule.
After you change the settings, please click “
Update Setting
” to update DVR
server’s settings before exit.
4.5.2 Playback DVR Events Files from Remote Center
Whether you are using a 4-CH DVR Remote center or a Dual DVR Remote
Center, you can take advantages of remote center to play back the recording
data on the DVR server.
Please click
to stop the recording before you
playback the files. When you click
to stop recording, you can still
monitor the remote channels at the same time.
Click
to see a DVR Play dialog. You can select “
Start Timed Play
” or
“
Start Event Play
” to play back the recording files.
