17
Sometimes the system has trouble detecting the hard disks, it
shows “Turn off and on the DVR” on the screen.
Follow the instruction to unplug DVR. Reboot and the system will
show the normal first time use screen.
After you format the hard drive(s), please enter the default password before you
enter the main menu. The factory default password is "111111". Use the following
front panel buttons to input a numeric password:
For "1"
For "2"
For "3"
For "4"
You can go to SUBMENU to change the password, and enable the
PASSWORD SETUP function. The default PASSWORD SETUP
setting is NO.
2.2 Surveillance
Screen
Surveillance video can be viewed and recorded in two screen modes:
EACH
mode
and
QUAD
mode.
Under the
EACH
mode, video from the video cameras is recorded in full-screen
resolution, but each video takes turns in being recorded (from one camera to the
next). Each of the surveillance videos is recorded only at a maximum frame rate of
7.5fps. When viewing live video using
EACH
mode, you can switch between full
screen and quad screen.
Whereas in
QUAD
mode, video from the video cameras is recorded at a lower
resolution, yet each video is recorded in full frame rate, full motion. Videos recorded
Turn off and on the DVR
