Channels section, enable the camera number to view the camera signal on Remote
Console screen. To select all the cameras, enable the
ALL
check box.
8.3
Using the Remote Playback
To use this feature, first you need to select the source of the file. Click the
Playback
button.
And then, in the Select Playback Mode dialog box, choose
Local Playback
to open the file
that is recorded in the Remote Console, and
Remote Playback
to open the file that is
recorded in the DVR server. When you choose Remote Playback, select
Download and
Playback
.
Click
OK
to proceed and
Cancel
to void this operation.
In the Video Playback Date/Time Selection, the number from 00 to 23 represent the time in
24-hour clock. The numbers from 01 to 16 represent the camera number.
To Make a Selection:
1. Select the date in the calendar. Use
and buttons to shift the calendar to the left
or right.
2. In the table below, click on the blue block to select and open the recorded file. The blue
block turns red when it is selected. The block that appears in white doesn’t have data.
48
