OSD MENU
Description
YES
HARD
DRIVE SETUP
OVERWRITE ENAB LED
HDD SIZE
1560,12MB
HDD USED
250MB
1%
HDD FORMAT
* HDD SIZE shows the total capacity
of the hard disk.
* HDD USED shows the amount of
space that has been used.
OVERWRITE ENABLED
Enable/disable overwriting the earliest record when the hard
disk space runs out. By default, the HDD overwrite setting is
enabled
HDD FORMAT
For security purpose, you may have to enter the password to
format hard disk
To format hard disk:
1. Use
the
▲
and
▼
buttons to go up and down and
select
HDD FORMAT
. Then press
or
▼
2. In
the
CHECK PASSWORD
screen, press
or
▼
.
Then use the
▲
and
▼
buttons to select the
security combination number. Repeat till you key in the last
number. Also, user can use the number button on the
remote control to enter the password. Press
or
▼
button again to make the selection. To move the selection
to the left and right, use
▲
and
▼
buttons
CHECK PASSWORD
ENTER PASSWORD
3. After entering the last number, the system will format the
hard disk
4. It is done when the “
HDD FORMAT COMPLETED
” appears
YES
HARD
DR IVE
SETUP
OVERWRITE ENAB LED
HDD FORMAT COMPLETED
HD D SIZE
156 ,012 MB
HD D USED
0MB
0%
HD D FORMAT
Formatting the hard disk will permanently delete all the
records and can no long r be retrieved
e
21
