OSD MENU
Description
1
2
3
4
0080
5005
NETWORK SETUP
IP MODE
NW ENABLE
VIDEO PORT
UPGARDE PORT
DHCP
-
SUBNET:
It is a bitmask used to identify the sub network
and how many bits provide room for host addresses.
Enter the subnet mask of the IP address which user has
assigned to DVR system.
-
GATEWAY:
A network device act as a passageway to
internet. Enter the network gateway IP address
-
DNS:
Domain Name Server translates domain names
(such as www.abb.com.tw) to IP addresses. Enter the IP
address of DNS if it is available.
-
MAC ADDRESS:
Only for user information. Don’t need to
enter the MAC address.
-
When all parameters are set, select the
CHANGE
to
confirm the configuration
.
192.168.153 .254
192.168.153 .1
00.00 .00 .00.00.00
NE TWOR K INF OR MATION
IP ADDR E S S
S UB NE T
G ATE WAY
DNS
MAC ADDR E S S
C HANG E
192.168.153 .100
255.255.255 .255
DHCP:
Assign the IP address by local DHCP server to
DVR system. Use
▲
and
▼
buttons to go up and
down and select
DHCP
, and then press
or
▼
to
make selection.
i
The DHCP (Dynamic Host Configuration Protocol) is a
set of rules used by a communications device (such as
a computer, router or networking adaptor) to allow the
device to request and get an Internet address from a
server which has a list of addresses available for
assignment
The DVR system will try to get an IP address from the
DHCP server. A message window will show up as below:
G E T IP NO W ! W A IT IN G ...
When DVR system gets an IP address from DHCP server,
the information will display as below:
192.168.153 .254
192.168.153 .1
00.00 .00 .00.00.00
NE TWOR K INF OR MATION
IP ADDR E S S
S UB NE T
G ATE WAY
DNS
MAC ADDR E S S
192.168.153 .10
255.255.255 .255
0
23
