FXT 5000 Series Field Service Guide
(continued)
LED
Name
and
Symbol
State Meaning
Action (if applicable)
Power
LED
Un-
lit
Neither power supply is receiving AC
power, or at least one power supply is
receiving power but the unit is powered
off
Check that at least one power supply has AC
power
Power the unit on by pressing the front panel
power switch or by using the Avere Control Panel
Solid
green
Unit is powered on and power is being
supplied to at least one of the node’s
power supply units
N/A
Unit
Identi-
fication
LED
(within
the UID
button)
Un-
lit
Normal state (unit identification has not
been activated)
N/A
Solid
blue
Local UID has been activated by press-
ing the UID button on the front panel
Push the UID button again to turn off the light
Blink-
ing
blue
Remote UID has been activated from
the remote web interface (Avere Control
Panel)
Turn off the LED by deactivating the remote UID
in the IPMI web interface
Front SAS Drive LEDs
Each SAS drive has two status lights. This chart applies to data drives and system drives.
LED
name
State
Meaning
Action (if applicable)
Drive
Ac-
tivity
LED
Unlit
Drive is not installed, or
unit is not powered on
Check for proper drive installation; power on the node if
necessary
Solid blue
Drive is installed
N/A
Blinking
blue
Drive is active
N/A
Drive
Status
LED
Unlit
Normal state
N/A
Solid red
Drive failure
Check the Avere Control Panel dashboard for a failed
drive alert; replace the drive
Blinking red
four times
per second
(4Hz)
Drive failure
or
Drive locator function has
been activated from the
Avere Control Panel
Check the Avere Control Panel dashboard for a failed
drive alert and replace the drive
or
Deactivate the drive locate function from the Avere
Control Panel
Node Details
page
14
Chapter 3. FXT 5000 Series Edge Filer Overview