FXT 5000 Series Field Service Guide
• For installing multiple pieces of equipment at the same time, first install the heavier equipment at the bottom,
then install the lighter equipment sequentially above that.
• Rack-mounted equipment should not be used as a shelf, work space, step, or seat.
2.6 General Precautions
Observe the following precautions to prevent injury to yourself and damage to the FXT Series edge filer.
2.6.1 Service Area Clearance
To permit service personnel to perform maintenance procedures on the FXT Series edge filer, a minimum of 24
inches of clearance must be provided in front of and behind the immediate area being serviced.
2.6.2 California Perchlorate Warning
This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive
harm.
The following notice is provided in accordance with California Code of Regulations Title 22, Division 4.5, Chapter
33, Best Management Practices for Perchlorate Materials.
This product includes a lithium manganese dioxide battery that contains a perchlorate substance.
Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
2.6.3 Two-Person Lift
A bare node without accessories and outer rails weighs 33 pounds (15.0 kilograms). For ease of installation it is rec-
ommended to use two people to lift and install the node into the rack. When lifting a node, handle it in such a way
that the weight is evenly distributed and stabilized. Be sure to comply with any personal lifting limits that may be in
effect for your locale.
2.6.4 CMOS Battery Replacement
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES
ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.
6
Chapter 2. Precautions for Product Service and Use
