AVer FD2020-1 User Manual Download

Page: 33 / 78

System > Network Setting > Sever

Used to send out the video via Email or FTP, or to save on NAS.



Mail Setting:

Used to send out the video via Email.

Login Method:

Click drop-down list to select the method to login Email server

– “

Account

” or

“

Anonymous

”.

b. Enter necessary information in

“

Bcc Mail

”, “

Sender Email Address

”, “

Recipient Email

Address

”, “

Mail Server

”, “

Mail Server Port

”, “

Account Name

”, and “

Password

”

columns.

c. Click

“

Apply

” to save the configuration.



FTP Setting:

Used to send out the video to FTP server.

a. Enter necessary information in

“

FTP Server

”, “

Account Name

”, “

Password

”, and

“

Path

”

columns.

Port:

Select the FTP server port.

c. If the user wants to create a new folder on the FTP server to save the video file, select

“

Yes

”

under the “

Create the folder

”.

Mode

: Select the FTP transmission mode.

e. Click

“

Apply

” to save the configuration.

Summary of Contents for FD2020-1















































































Search results

Summary of Contents for FD2020-1

Reviews:

Related manuals for FD2020-1

Brands by name

Popular brands

AVer FD2020-1, User Manual

Search results

Summary of Contents for FD2020-1

Reviews:

Related manuals for FD2020-1

Brands by name

Popular brands