24
To Use the Emap
1. Click
E-map
.
2. In the Emap screen, click the camera icon to switch on the area where the camera is located on the map
and to display the video at the upper right corner of the Emap screen. At the lower right corner of the
Emap screen, it lists all the warning message.
3. Click
Close
to exit Emap screen.
2.2.2
Familiarizing the Buttons in PTZ Camera Controller
(1)
(11)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Name
Function
(1) Close
Exit PTZ camera controller.
(2) Setup
Configure PTZ cameras.(see also
Chapter 2.2.2.1
and
Chapter 2.2.2.2
)
(3) AutoPan
Operate the PTZ cameras automatically based on the selected camera group
preset position number.
(4) Focus +/-
Adjust the focus manually to produce clear image.
(5) Zoom +/-
Zoom in and out the image.
(6) Direction buttons
Adjust and position the focal point of the PTZ camera.
(7) Camera ID pane
Display the PTZ camera number that is being operated.
(8) Save Camera preset position
Save the PTZ camera preset position number. Select the camera and click the
preset position number and save it.
(9) Camera lens speed controller
Adjust the moving speed of the PTZ camera lens.
(10) Camera preset position
number
Move the PTZ camera to the preset point.
(11) Group AutoPan
Select to automatically operate PTZ camera in group.
