Avaya MultiVantage, Installation Manual

Page: 67 / 246

Connect data modules
Issue 4 October 2002
67
555-233-116
Configuring the ring indicator on 7400A DCE
The ring-indicator (pin 22) setting can have either of two values: CYCLE or ON
(the default).
1. Accept the default values, unless otherwise instructed. When the SET RI
LEAD? prompt appears, press the NEXT/NO button to keep the default,
ON.
Enabling remote loopback on 7400A DCE
The remote-loopback setting (pin 21) can have either of two values: ON or OFF
(the default).
1. Accept the default values, unless otherwise instructed. When the SET RL
LEAD? prompt appears, press the NEXT/NO button to keep the default,
ON.
Setting the signals-disconnect (SIGLS DISC) option on 7400A DCE
The settings can have either of two values: ON (the default) or OFF.
Accept the default values, unless otherwise instructed.
1. When the SET SIGLS DISC? prompt appears, press the NEXT/NO button
to keep the default, ON.
SET RI LEAD?
DATA NEXT/NO BACK ENTER/YES
● ➜ ● ❍ ❍
Push the button indicated by the arrow (
➜
)
SET RL LEAD?
DATA NEXT/NO BACK ENTER/YES
● ➜ ● ❍ ❍
Push the button indicated by the arrow (
➜
)
SET SIGLS DISC?
DATA NEXT/NO BACK ENTER/YES
● ➜ ● ❍ ❍
Push the button indicated by the arrow (
➜
)