Avaya MultiVantage, Installation Manual

Page: 122 / 246

Terminal server installation
555-233-116
122
Issue 4 October 2002
Installing and administering the
terminal server
Make sure you have all the equipment on site before the installation. You must
have the hardware listed in
Table 14 .
You also need a computer (laptop) with the HyperTerminal software program for
the initial administration of the IOLAN+ and to set up the ports.
The general process is to
■
Connect the IOLAN+ to the adjunct and the LAN
■
Administer the ports on the IOLAN+ using a PC or laptop at the local site
■
Test the connectivity back through the switch
Distance limits
The distance limit from the switch to the LAN hub is 328 feet (100 meters). The
distance limit from the LAN hub to the terminal server is 328 feet (100 meters). If
installed, the limit from the terminal server to the adjunct is 50 feet (15 meters).
Table 14. Required equipment
Comcode Description Qty Supplier
700015084 IOLAN+ 104 communications server 1 Avaya
NA RJ45-to-DB25 connector for IOLAN+
(supplied with 700015084) 4 Avaya
NA DB25-to-DB9 connector for PC COM port 1 Avaya
NA RS232 Null modem (if needed for PC or
printer connectivity) 1 or more Avaya
405369042 Male/female adapter (if necessary) 1 or more Avaya
846943306
or 104154414
NA
6-inch RJ45 crossover cord, or
10/100Base-T auto-sensing LAN hub or
router
1
1
Avaya
Customer
102631413
NA
259A adapter, or
CAT5 cross connect hardware and
connecting blocks
1 Avaya
Customer
NA RJ45 UTP Category 5 modular cords 1–2 Customer
NA 451A in-line RJ45 adapters, as needed to
connect modular cords together