Avaya Media Gateway G350 Upgrade And Service Manual Download Page 92 | Manualshive

Page: 92 / 96

Avaya Media Gateway G350 Upgrade And Service Manual Download Page 92

Troubleshooting
No power on the G350

92

Upgrade and Service Guide for the Avaya G350 Media Gateway

June 2004

No power on the G350

If there is no power at all on the Avaya G350 Media Gateway, take the following steps to identify the
problem:

1

Check the AC power source with a voltmeter.

2

Connect the Avaya G350 Media Gateway to a different AC power source. If the G350 has power,
the problem is with the original power source. If the network still does not work, go on to the next
step.

3

Check the ALM LED on the Avaya G350 Media Gateway chassis. If it is lit, there may be a
system wide problem. Contact your project manager. See

The front panel of the Avaya G350

Media Gateway chassis

on page 73.

A trunk stops working

If a trunk stops working, take the following steps to identify the problem:

1

Check the connection between the trunk and the Avaya G350 Media Gateway. If the physical
connection is loose, tighten the connection. If the trunk still does not work, go on to the next step.

2

Check the ALM LED on the module to which the trunk connects. If it is lit, there may be a
problem with the module. Contact your project manager. If not, go on to the next step. For
information on the various modules and their LEDs, see

Front panel description

on page 73.

3

Check the ALM LED on the Avaya G350 Media Gateway chassis. If it is lit, there may be a
system wide problem. Contact your project manager. See

The front panel of the Avaya G350

Media Gateway chassis

on page 73.

A WAN line stops working

If a WAN line stops working, take the following steps to identify the problem:

1

Check the connection between the WAN line and the Avaya G350 Media Gateway. If the physical
connection is loose, tighten the connection. If the line still does not work, go on to the next step.

2

Check the ALM LED on the module to which the WAN line connects. If it is lit, there may be a
problem with the module. Contact your project manager. If not, go on to the next step. For
information on the various modules and their LEDs, see

Front panel description

on page 73.

3

Check the ALM LED on the Avaya G350 Media Gateway chassis. If it is lit, there may be a
system wide problem. Contact your project manager. See

The front panel of the Avaya G350

Media Gateway chassis

on page 73.

«
...
90
91
92
93
94
...
»

Summary of Contents for Media Gateway G350

































































































Reviews:

No comments