Avaya Network Management Console Introduction
44 Avaya Integrated Management Release 5.0 Network Management Console
Setting CM Server Parameters
The CM Servers Passwords page of the Options dialog box enables you to set the login
parameters to connect to CM servers in your network.
Note:
Note:
To discover analog, digital or IP phones, you must add the relevant CM Login
parameters to the table.
To set CM server login parameters:
1. Click the
CM Servers Passwords
tab at the top of the Options dialog box. The CM Servers
Passwords page appears.
Figure 15: Options Dialog Box - CM Server Passwords Page
2. Click
Add
to add a new CM server with which you wish to connect.
3. Click
Discover
to add the CM server to the list of devices Network Management Console
attempts to discover.
4. Enter the IP address of the CM server.
5. Enter the login ID and password to access the CM server.
6. Enter the ASG key, if ASG encrypted login is used.
7. Select the encrypted login method. Possible values are
ASG
and
SSH
.
8. Click
Apply
.
Note:
Note:
The ASG key is a 20-character octal code, the 19th character of which must be
either 0, 2, 4, or 6, and the 20th character of which must be 0.
Summary of Contents for Integrated Management
Page 10: ...Contents 10 Avaya Integrated Management Release 5 0 Network Management Console...
Page 22: ...Avaya Network Management 22 Avaya Integrated Management Release 5 0 Network Management Console...
Page 73: ...The Network Table Issue 7 January 2008 73 Figure 24 Device Coloring Method...
Page 182: ...182 Avaya Integrated Management Release 5 0 Network Management Console Index...
