Using the Configuration Wizard Screens
Issue 7 January 2008
105
To continue, click
Next
. The Configuration Wizard continues with
Step 4 - Specify IP Networks
to be Managed
.
Configure User SNMP Parameters
The Configuration Wizard enables you to manage SNMP user parameters used for accessing
the new and existing devices in your network.
Figure 43: Configure User SNMP Parameters Screen
To edit the parameters for an existing SNMPv3 user:
1. Select the
Existing SNMPv3 User
option.
2. Select the user from the
Select User
drop-down list.
To add a new SNMPv3 user:
1. Select the
New SNMPv3 User
option.
2. Enter the user name for the new SNMPv3 user.
3. Enter the SNMPv3 authentication password for the new user and enter it again to verify the
password.
Note:
Note:
The authentication scheme supported by the CM is displayed. This field is
read-only.
4. Enter the SNMPv3 privacy password and enter it again to verify it.
Summary of Contents for Integrated Management
Page 10: ...Contents 10 Avaya Integrated Management Release 5 0 Network Management Console...
Page 22: ...Avaya Network Management 22 Avaya Integrated Management Release 5 0 Network Management Console...
Page 73: ...The Network Table Issue 7 January 2008 73 Figure 24 Device Coloring Method...
Page 182: ...182 Avaya Integrated Management Release 5 0 Network Management Console Index...
