DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN
555-233-121
Issue 2
November 2000
SREPN Maintenance
2-20
Maintenance procedure
2
Table 2-8
describes when the current or faulted hardware path displays.
For more information on system links and hardware paths, refer to:
■
SYS-LINK Maintenance Object in Chapter 9 of
DEFINITY ECS
Release 9 Maintenance for R9r
■
‘‘System links’’ on page 2-43
3. Look for alarms on the components listed under the appropriate hardware
path. If any alarms are present, follow the maintenance procedures for the
alarmed components to clear those alarms first.
4. To help corroborate the information that you have gathered, inspect the
Release 9r Alarm and Error logs (
Figure 2-14
).
NOTE:
Since the system is in Survive mode, the Release 9r thinks it has lost
its connections to the EPN. Therefore, alarms may be present, even
though the problem has been diagnosed and fixed.
Figure 2-14. Display alarms screen (Release 9r)
Table 2-8. Current and faulted hardware paths
If link is
Current hardware
path displays?
Faulted hardware
path displays?
Focus attention on
path
up
Y
N
current
down
N
Y
faulted
display alarms Page 1 of 2 SPE A
ALARM REPORT
Port Maintenance On Alt Alarm Svc Ack? Date Date
Name Brd? Name Type State 1 2 Alarmed Resolved
01E02 SNI-PEER n MAJOR 03/09/00:21 00/00/00:00
01E20 SNI-CONF n MAJOR 03/09/00:26 00/00/00:00
PN02 EXP-PN n MAJOR 03/09/00:30 00/00/00:00
PN02 EXP-PN n MAJOR 03/09/00:30 00/00/00:00
2 A-PNC FIBER-LK n MAJOR 03/09/00:30 00/00/00:00
2 A-PNC FIBER-LK n MAJOR 03/09/00:30 00/00/00:00
2 A-PNC FIBER-LK n MAJOR 03/09/00:30 00/00/00:00