manualshive.com logo in svg

Avaya Converged Platform 130 Series, Installing Manual, Page: 66 / 86

Share
Download
Avaya Converged Platform 130 Series Installing Manual Download Page 66

4. In the Assign license window, enter the license key in the 

License key

 field.

5. Click 

Check license

.

6. After the license checking is complete, click 

Assign license

.

Dell USB R640 RAID Configuration

Introduction

The Dell R640 RAID controller (H730P Mini) is an enterprise-class controller providing a robust

infrastructure to maximize server uptime.

This section describes the procedures to configure the Dell R640 RAID controller (H730P Mini) for

Avaya Converged Platform (ACP) 1XX RAID Array configurations.

Note:

The user needs a VGA monitor, a USB keyboard and a USB mouse to configure the RAID

Controller.

Preparing to configure Dell R640 RAID controller

About this task

Use this procedure to prepare the Dell R640 RAID controller (H730P Mini) for Avaya ACP 1XX

RAID Array configuration. For that, you must delete all the existing configurations from the

controller.

Configuration

October 2019

Installing the Avaya Converged Platform 130 Series

66

Comments on this document? [email protected]

Summary of Contents for Converged Platform 130 Series























































































Reviews:

No comments