To protect against ESD damage, take the following measures before you connect data cables to
the device:
• Always use antistatic wrist straps. Make sure you adjust the strap to provide good skin
contact.
• Ensure that you properly ground work surfaces and equipment racks for protection against
electrostatic discharge. You must connect the common point to the building ground wire. In a
properly wired building, the nearest reliable ground is typically at the electrical outlet.
• Avoid contact between equipment and clothing. The wrist or ankle strap protects only the
equipment from ESD voltages on the body; ESD voltages on clothing can still cause damage.
• Avoid touching any connector pins.
• Do not remove the wrist or ankle strap until the installation is complete.
Package contents
The following items are provided with your server. Contact Avaya Support if any of the following
items are not present.
• Dell A7 ReadyRails II sliding rail assembly kit
- Two Dell A7 ReadyRails II sliding rail assemblies
- Two hook and loop straps
• Cable management arm kit
- Cable management arm
- Static support tray
- Status indicator cable
- Cable tie wraps
- Right attachment bracket
- Left attachment bracket
• Server faceplate
• Server faceplate key
• Rack Installation Instructions Booklet
• Enterprise Products Safety, Environmental and Regulatory Information Booklet.
Package contents
October 2019
Installing the Avaya Converged Platform 130 Series
21