manualshive.com logo in svg

Avaya Converged Platform 130 Series, Installing Manual, Page: 28 / 86

Share
Download
Avaya Converged Platform 130 Series Installing Manual Download Page 28

Note:

A region-specific power cable is shipped separately from the server package based on what

was entered in the Configurator Tool.

Before you begin

Ensure the system has been installed and secured before you attach cables. Ensure you have

take precautions against electrostatic discharge before you begin. See the following sections for

more information:

•

Installing the server 

 on page 22

•

Electrostatic discharge

 on page 20

Procedure

1. Connect the system to the appropriate power source.

2. Loop and secure the power cable using the retention strap.

3. Attach USB keyboard and VGA monitor to system before powering up.

4. Power on the system.

The following image shows the location of the power button.

Installation

October 2019

Installing the Avaya Converged Platform 130 Series

28

Comments on this document? [email protected]

Summary of Contents for Converged Platform 130 Series























































































Reviews:

No comments