Cajun P550R/P880/P882 Switch Installation Guide
3-1
3
Initial Configuration
Overview
This chapter provides the following initial configuration
information that is pertinent to both layer 2 and layer 3 modules:
■
Terminal Settings
■
Initial Configuration of the Supervisor Module
■
Changing Cajun Modes
Terminal Settings
To complete initial switch setup, you need a PC or video terminal
with a connection to the serial port on the supervisor module.
Refer to Table 3-1 for the required terminal settings to
communicate with the switch.
Table 3-1. Terminal Settings
Baud Rate
Stop Bits
Data Bits
Flow
Control
Parity
9,600
1
8
Xon/Xoff
None