Cajun P550R/P880/P882 Switch Installation Guide
Unpacking and Installing
2-3
Figure 2-1. Selecting a Location
■
AC power source(s) within 2 m (6 ft.) (separate sources, on
separate circuits, if you require maximum fault tolerance)
■
Ambient temperature between 0°C and 40°C (32°F to 104°F)
■
Relative humidity less than 95%, non-condensing
Installing the Switch
The process for installing the switch is as follows:
1.
Preventing Electrostatic Discharge
2.
Installing the Chassis
3.
Installing the Cable Management Bracket
4.
Installing the Modules
5.
Installing the Cables
6.
Ensuring that You Have Enough Power Available
7.
Connecting the Power Supplies
8.
Powering On the System
* Note:
The Cajun P550R switch requires 16MB RAM for proper
functioning.
Air Flow